Applied Studies (APST) 220

3D Modeling, Digital Representation & Presentation (Revision 1)

image

Revision 1 is closed for registrations, replaced by current version

Delivery Mode: Individualized study online

This course is charged a lab fee.

APST 220: 3D Modeling, Digital Representation & Presentation is intended for students enrolled in the BSc (Architecture) program at the RAIC Centre for Architecture at Athabasca University.

Credits: 3

Area of Study: Applied Studies

Prerequisite: APST 215

Centre: RAIC Centre for Architecture

Faculty: Faculty of Science & Technology

Overview

APST 220: 3D Modeling, Digital Representation, and Presentation provides students with graphic skills that are essential to many tasks in design and construction documentation. In this course you will develop your understanding and practice of modeling, spatial analysis, photography, presentation, and publication through the use of both digital and traditional tools and approaches. Throughout the course you may wish to maintain a personal sketchbook (which will not be graded).

This course walks you through techniques of model-making and drafting to develop complex shapes. Through video demonstrations, readings, and assignments, you will practice the physical and technical skills used to produce and understand architectural models. Using a case study of an existing architectural structure, you will learn to analyze the architecture within the context of technologies and form. In addition, you will learn how to photograph architectural structures and landscapes and to digitally edit them, with the ultimate intent of presenting and publishing materials.

Course Outline

The six units in the course are listed below:

  • Unit 1 Polyhedron Modeling
  • Unit 2 Spatial Model Composition
  • Unit 3 The Barcelona Pavilion
  • Unit 4 Concept Diagrams
  • Unit 5 Architectural Montage
  • Unit 6 Presentation and Publication

Learning Outcomes

After completing this course, you should be able to:

  1. Demonstrate mastery using computer technologies.
  2. Through analysis and model-building, interpret the architectural concepts of an architectural structure.
  3. Integrate and apply technical competencies using photography and computer-assisted technologies.
  4. Using visual and written media, demonstrate an understanding of critiquing spatial form and functions in design and presentation.

Evaluation

Your work in this course will be evaluated based on six assignments. Instructions for submission are provided in each assignment. The table below provides weighting for the assignments:

Assignment Due Weight
Assignment 1 Unit 1 15%
Assignment 2 Unit 2 10%
Assignment 3 Unit 3 20%
Assignment 4 Unit 4 15%
Assignment 5 Unit 5 20%
Assignment 6 Unit 6 20%
Total   100%

A final course grade of 67% or higher is required to pass the course. If you plan to pursue registration or licensing in architecture, this grade will satisfy the CACB requirement.

To learn more about assignments and examinations, please refer to Athabasca University's online Calendar.

Course Materials

Textbook

Ching, Francis D.K. (2010.) Design drawing (2nd ed.). New Jersey: Wiley. (eText) (Instructions for downloading this book are included in your course package.)

Software

Specially licensed Adobe Creative Suite 6 Design Standard for Windows or Mac, with:

  • Acrobat X Pro
  • Adobe Illustrator CS6 (vector software)
  • Adobe Illustrator CS6 (64 bit) (vector software)
  • Adobe InDesign CS6 (document-layout software)
  • Adobe Photoshop CS6 (image-editing software)
  • Adobe Photoshop CS6 (64 bit) (image-editing software)

Drawing/Modelling Materials and Tools

The course package contains one set of materials, listed below, which you will use to perform assignments:

  • white or beige 2-ply card stock
  • tracing paper
  • stainless steel knife
  • masking tape
  • white glue
  • modeling set square
  • 0.30 mm precision felt pen (or similar)
  • 2H pencil or mechanical pencil, compass, protractor, ruler
  • scale ruler
  • coloured markers and/or pencil crayons

No replacement materials will be provided.

Tools and Equipment

In order to complete APST 220 students will require access to the following additional tools and equipment (not included in the course package):

Course Home Page (online): The course home page houses all the online components of your course.

Study Schedule (online): The study schedule on your course home page includes the Course Information, the six units of the Study Guide, links to the online readings, and links to your assignments.

Study Guide (online): The Study Guide units are embedded in the Study Schedule on the course home page.

Assignments (online): The assignments are on the course home page, along with helpful instructions.

Undergraduate Student Handbook (online): The Undergraduate Student Handbook contains essential information on administrative and academic procedures for students.

Forms: Forms you may need are available through the myAU portal.

Athabasca University reserves the right to amend course outlines occasionally and without notice. Courses offered by other delivery methods may vary from their individualized-study counterparts.

Opened in Revision 1.

Updated May 17 2016 by Student & Academic Services